If you’re having trouble getting your Whirlpool front load washer to start, you are not alone. Millions of people struggle with this issue every year. Whether it’s due to a faulty part or a lack of power, there can be several reasons why your Whirlpool front load washer is refusing to start. In this article, we look at five of the most common reasons why your Whirlpool front load washer won’t start in 2023. We also provide troubleshooting tips and advice on how to fix the problem for good with minimal effort and cost.
Washer Not Getting Power
If your Whirlpool front load washer won’t start, the first thing to check is whether it’s getting power. If the washer isn’t plugged in, or if the circuit breaker has tripped, it won’t be able to start.
Once you’ve checked that the washer is plugged in and that the circuit breaker is functioning, take a look at the control panel to see if there are any error codes displayed. If there are, refer to the owner’s manual to troubleshoot the issue.
If there are no error codes and the washer still won’t start, it’s possible that the door lock mechanism is faulty. To test this, try pressing and holding the door lock button for five seconds. If the door doesn’t unlock, you’ll need to replace the door lock assembly.
Washer Door Is Not Latched
If your Whirlpool front load washer door is not latched, it could be the reason why your washer won’t start. To check if the door is latched, open the door and look for the red latch that secures the door shut. If the red latch is not visible, or if it is loose, the door is not properly latched and needs to be fixed before the washer can be used.
Check Washer Settings
If your Whirlpool front load washer won’t start, the first thing you should check is the washer settings. Make sure that the washer is properly plugged into an outlet and that the water supply valves are turned on. Check the washer’s control panel to make sure that all of the settings are correct. If everything looks good on the control panel, then move on to checking the door seal and gasket.
Defective Whirlpool Washer Parts
If your Whirlpool front load washer won’t start, there are a few possible reasons. One of the most common reasons is defective Whirlpool washer parts. If any of the following parts are defective, it could prevent your washer from starting:
-Lid switch: The lid switch is located near the door of the washer. If this switch is defective, the washer will not start.
-Door lock: This device stops the washing door from opening while the wash cycle is running. If this lock is defective, the washer will not start.
-Control board: The control board manages all of the washer’s functions. If this board is defective, the washer will not start.
How do I manually reset my washing machine?
If your Whirlpool front load washer won’t start, there are a few things you can do to try and reset it. Make sure the washer is connected in and that the socket it is plugged into is operational before continuing. Next, check the water supply hoses to make sure they are turned on and that there is no kink or blockage in the hose. Finally, if none of these solutions work, you may need to manually reset the washing machine.
To manually reset your Whirlpool front load washing machine:
1. Remove the washer’s plug from the socket.
2. Wait 30 seconds.
3. Plug the washer back into the power outlet and press the power button to turn it on.
Do Whirlpool washers have fuses?
If your Whirlpool front load washer won’t start, one possible reason is that it has a blown fuse. To check if this is the problem, open up the washer’s cabinet and locate the fuse box. Inside, there should be a diagram that shows you which fuse corresponds to the washer. Replace the fuse with a new one of the same amperage if it has blown.